说明

Untested; does not include any cartridges nor does it include the PC or the Interface Card that goes in the PC. It also does not include the foot pedal Some missing components. No testing available. Includes item only as pictured with no other parts, cords, cables or accessories. Last serviced in 2015 before being removed from service.

配置

Wire Bondtester w/ Leica GZ6 General Machine footprint: W (including joystick, excluding PC/monitor) 425mm D (including front arm rest) 730mm H 670mm Weight: 45kg Power Supply: Switchable 100/110V, 220/240V AC 50/60Hz Pneumatic: Supply (for machine) 4bar, 6mm OD/4mm ID plastic pipe clean dry air Vacuum: Supply (for workholder) min. 500mm Hg plastic pipe International Certification: Compliant with European CE Regulations – EMC Directive, Low voltage Directive, Mechanical Safety Directive Manufactured: In accordance with ISO 9002 Monitor: VGA/SVGA (Optional 17” LCD Flat Panel Display Power Voltage: 1 Ph. 110 V/230 V Current: 110V Max 5A, 230V Max 3.15A Power: 850 VA Frequency: 50 / 60 Hz Weee: 139038 Axis X, Y axis accuracy: ±10 microns over 50mm X, Y axis repeatability: ±5 microns over 50mm X, Y axis resolution: <1 micron X, Y axis maximum speed: 2mm/second Y axis maximum force: 100kg (standard) X axis maximum force: 5kg Z axis travel: 65mm Z axis accuracy over full travel: ±10 micron Z axis accuracy over 2mm: ±2 micron Total stepback accuracy of complete system for 250 gram shear cartridge over 25 micron of Z travel: ±1 micron Z axis resolution: ±0.125 micron Z axis maximum speed: 7mm/second Z axis maximum test speed: 5mm/second Z axis maximum force: 10kg pull at 5mm/second Workholder working envelope: X 220mm, Y 220mm, Z 50mm Standards The Nordson DAGE 4000 conforms to, and in many cases exceeds, the following industry standards: Cold bump pull: JEITA EIAJ ET-7407 BGA bump shear: JEDEC JESD22-B117A Cold bump pull: JEDEC JESD22-B116 AU ball shear: JEDEC JESD22-B116 Ball bond shear: ASTM F1269 Wire pull: DT/NDT MIL STD 883 Die shear: MIL STD 883 Stud pull: MIL STD 883 Flip chip pull: JEDEC JESD22-B109 Manufactured to International Standards Manufactured in accordance with ISO 9001:2008 European Directives CE Declaration of Conformity Machinery Directive (2006/42/EC) Low Voltage Directive (2006/95/EC) Electromagnetic Compatibility (2004/108/EC) Restriction of the use of certain hazardous substances in Electrical and Electronic equipment (RoHS) (2002/95/EC)

OEM 型号描述

The Nordson DAGE 4000HS bondtester is based upon the industry standard Nordson DAGE 4000 multi-purpose bondtester platform. The 4000HS has significant differences to the mode of operation for both shear and pull modes with speeds up to 4m/sec for shear and 1.3m/s for pull. The 4000HS bondtester also offers advanced analysis options, specifically force versus displacement graphs and energy measurements in addition to the conventional peak force measurement.