说明

无说明

配置

Equipped with CT and X-Tract (Laminography) Detector: Varex 1313Dx (130 x 130 mm panel with 1000 x 1000 pixels, 16 bit detector with 127 micron pixels) Source: - 160kV tube with 20W of target power and >0.5μm feature recognition - Open-style X-ray source with unlimited life cycle - Integrated maintenance-free generator, no high-voltage cable greasing - Unlimited X-ray target positions - Ultra low-cost user-replaceable tungsten filaments for long-term low cost of system ownership Manipulator: - 5-axis programmable sample stage - 0°-72° detector tilt range (measured at center of detector) - Advanced semi-sphere imaging range: 81° oblique viewing on any 360° rotational angle over entire tray surface - 517mm source-detector distance - Hardened carbon fiber tray as standard - Maximum sample weight capacity of 5kg - Max sample volume of 406 L x 406 D x 406 H mm (in Tray), 711 L x 762 D x 406mm H (on tray) - 2046x geometric (non-digital) magnification - Linear tracking of source and detector for available radiation collimation and protection of sensitive electronics Detector: - Varian 1313Dx 16 bit Digital Panel - 130 x 130 mm panel with 1000 x 1000 pixels - 16 bit detector with 127 micron pixels - Frame rate up to 30 fps unbinned System: - Machine-learning algorithms for inspection of electronic assemblies - Advanced automated inspection of obstructed BGA's, QFN’s, etc - Automated x-ray flux calibration for repeatability and reproducibility - IPC (Interprocess Communication) interface for highly complex automated tasks to be developed as well as enabling third party hardware and analysis software to be integrated. - 3 high-grade proportional joysticks for advanced sample manipulation - Point-click sample manipulation and high-resolution map stitching - Large 12 x 10" viewing window - Plug-and-Play Standard 100/110/115/200/220/230/240VAC configurable, power requirement. No air or water needed - System shielded to < 1 μSv/hr, no special protection needed - System weight max 2,100 kg Inspect-X software for XT V 160 Laser Pointer for Varian 1313Dx - An additional Laserpointer is fitted to the detector arm - Laser spot indicates visually the X-ray point of interest on turntable or sample - works even when detector is tilted X.Tract option (laminography) including: ‐ X.Tract acquisition and reconstruction software license ‐ X.Tract calibration artefact with fixture

OEM 型号描述

Electronics X-ray Inspection Specifically designed for use in production lines and failure analysis laboratories, the XT V 160 can be configured with a choice of premium system components to optimize the performance for your needs. Besides manual real-time inspection, the inspection process can be fully automated to maximize productivity.