说明
SSM 530 HG-CV System for EPI resistivity measurement ■ Capable up to 12" Wafer ■ SSM 52 Capacitance Measurement Unit ■ Motor control unit ■ Pneumatic control Unit ■ PC System ■ PROCAP software ■ Performance - CV Meter Noise Test (Schottky Diode Test): 1 STD(%) <0.167% - MOS Wafer Area Test : 1 STD(%) <0.1% ■ Capacitance: 0.5~ 2000pF ■ Conductance: 0.5 ~ 2000μS ■ DC Bias voltage: ± 250V ■ Ramp Rate: 0 ~ 50 V/s continuously variable ■ Drive Signal Frequency at 1Mhz voltage=15mV rms ■Stress Voltage: ± 250V ■ CDA: 80~100psi, Nitrogen for sample purge:0~15psi ■ Ambient temperature: 18° - 25°C ± 2°C over 24 hour period配置
无配置OEM 型号描述
The SSM 530 is a fully automatic mapping system that provides a variety of electrical characterization measurements for non-patterned wafers used in epitaxial silicon production and front-end semiconductor processing. It has the same abilities as the SSM 5130, but it does not have a robot. The SSM 530 eliminates the need for costly metal and poly deposition processes by using a pneumatically controlled, non-damaging probe design and a top-side mercury contact. It features an extremely stable contact area and uses only a small quantity of mercury to make highly repeatable measurements for process development and process monitoring applications. Typical applications include EPI resistivity, low-k dielectric constant, and oxide integrity. The system can handle wafer diameters from 200 mm to 300 mm and can perform single-site and multiple-site maps. It also features automatic face-up loading to prevent wafer damage, precision pressure regulators for Hg contact, and PROCAP software that provides a full suite of measurements.文件
无文件
SSM
530
类别
EPI Resistivity Measurement
上次验证： 14 天前
物品主要详细信息
状况：
Refurbished
运行状况:
未知
产品编号：
146136
晶圆尺寸：
12"/300mm
年份：
2008
Logistics Support
Available
Transaction Insured by Moov
Available
Refurbishment Services
Available
说明
SSM 530 HG-CV System for EPI resistivity measurement ■ Capable up to 12" Wafer ■ SSM 52 Capacitance Measurement Unit ■ Motor control unit ■ Pneumatic control Unit ■ PC System ■ PROCAP software ■ Performance - CV Meter Noise Test (Schottky Diode Test): 1 STD(%) <0.167% - MOS Wafer Area Test : 1 STD(%) <0.1% ■ Capacitance: 0.5~ 2000pF ■ Conductance: 0.5 ~ 2000μS ■ DC Bias voltage: ± 250V ■ Ramp Rate: 0 ~ 50 V/s continuously variable ■ Drive Signal Frequency at 1Mhz voltage=15mV rms ■Stress Voltage: ± 250V ■ CDA: 80~100psi, Nitrogen for sample purge:0~15psi ■ Ambient temperature: 18° - 25°C ± 2°C over 24 hour period配置
无配置OEM 型号描述
The SSM 530 is a fully automatic mapping system that provides a variety of electrical characterization measurements for non-patterned wafers used in epitaxial silicon production and front-end semiconductor processing. It has the same abilities as the SSM 5130, but it does not have a robot. The SSM 530 eliminates the need for costly metal and poly deposition processes by using a pneumatically controlled, non-damaging probe design and a top-side mercury contact. It features an extremely stable contact area and uses only a small quantity of mercury to make highly repeatable measurements for process development and process monitoring applications. Typical applications include EPI resistivity, low-k dielectric constant, and oxide integrity. The system can handle wafer diameters from 200 mm to 300 mm and can perform single-site and multiple-site maps. It also features automatic face-up loading to prevent wafer damage, precision pressure regulators for Hg contact, and PROCAP software that provides a full suite of measurements.文件
无文件